Products

Rohm has developed a range of five 100V dual mosfets for single-phase or three-phase bridges in fan motor drives. Four of them are dual n-channel in 5 x 6mm or 3.3 x 3.3mm packages, and one has one n-channel and one p-channel mosfet in the same 5 x 6mm package. “Recent years have seen a transition to higher voltages from ...

U-blox’ LARA-R6 LTE Cat 1 and LARA-L6 LTE Cat 4 cellular modules have been certified to Radio Equipment Directive (RED) cybersecurity, having passed RED article 3.3 d/e/f requirements using ETSI’s EN 303 645 standard. “As cyberattacks and privacy concerns grow, there’s an urgent need for wireless devices and products to feature enhanced security. With stricter regulations on the horizon, manufacturers ...

Seco will present its latest SMARC release 2.1.1 computer-on-module at Smart Production Solutions (SPS 2023). SOM-SMARC-Genio700 has MediaTek’s octa-core 6nm Genio 700 application processor that has two 2.2GHz Arm Cortex-A78 cores and six 2GHz Cortex-A55 cores as well as a 4Top/s AI accelerator. This joins a couple of other CoMs also designed to release 2.1.1: SOM-SMARC-MX93 is built around NXP’s i.MX ...

CUI Devices has announced a line of medical buzzers compliant with IEC 60601-1-8 alarm signal requirements. There are four CPIM-4410-80x buzzers, with a letter replacing the ‘x’ depending on function: C for the cardiovascular tone, T for the general tone, V for the ventilation tone and Y for the oxygen tone. Each has a stand-by (silent) mode and three alarm ...

ST has created a dual precision op-amp for automotive sensor signal conditioning, with 20µV input offset voltage and 100nV/°C drift, and operation over 4 to 36V and -40 to 125°C. Input common mode range for TSB182, as it will be known, is from its negative rail to within 2V of its positive rail, and the output is rail-to-rail. Maximum offset ...

To meet Open Compute Project (OCP) requirements, Molex has created a connector system that combines low-speed signals, high-speed signals and power into a single cable assembly. The “data-center product development team collaborated with the power engineering group to optimise power-contact design, thermal simulation and power dissipation”, according to the company. Inside is up to 4A can be carried alongside 10 ...

Powerbox has announced a ruggedised 1,200W ac-dc power supply for ground-based defense applications and harsh industrial environments. Called OFD1200A and suitable for use inside sealed enclosures, it has a metal chassis and requires cooling by conduction though its baseplate – which needs to be maintained between -40 and +95°C (derating applies sometimes – see the product manual). Shock and vibration ...

After announcing 60V opto-mosfet relays last week, this week Panasonic has revealed a 600V type in a 2.65 x 4.45 x1.8mm package. AQY206GV’s 8Ω mosfet (15Ωmax) will switch 600V, and 150mA (450mA pulsed), with a maximum dissipation of 350mW. Its SSOP package is rated for 1,500Vrms isolation, and the whole device will work up to +105°C ambient. Maximuturn on and ...

Ittia has ported its DB IoT database for microcontrollers to a sub-set of the STM32 MCU family, via the STM32CubeIDE integrated development environment. “Real-time data capture and edge analytics are becoming common requirements for edge devices, including machine learning and AI applications,” according to Ittia. “Manufacturers selecting STM32 microcontrollers to build gateways, industrial systems and medical devices can now locally ...

Hirose has designed a miniature hybrid flexible printed circuit (FPC) to board connector family called BK22 that can handle signals and power totalling 100W – for USB fast-charging, for example. By “using an FPC to connect the USB to the PCB, the USB can be placed anywhere within the design of the end-product”, according to the company. “BK22 suppresses heat ...