Concurrent Technologies has put Intel Atom x7000RE Amston Lake processors into a VME board, adding image processing and AI audio processing accelerators to the venerable form factor. CPU choice on the board, called Rhea, is either the four-core 1.5GHz x7433RE, or the two-core 2GHz x7213RE. “Whilst no longer the cutting edge of technology, VME continues to be a widely ...
Industrial Electronics
Electronics related to industrial applications
Embedded World: Atom x7000RE SMARC processor modules for industry
Congatec announced SMARC modules based on Intel’s Atom x7000RE ‘Amston Lake’ processors. “Specially designed for industrial requirements, they deliver eight processor cores, double the previous generation, while maintaining the same power consumption,” according to Congatec. Called conga‑SA8, the modules are credit card size and operate over -40 to +85°C. Read all the latest news from Embedded World 2024 » AI ...
Embedded World: Atom x7000RE edge AI servers
Supermicro has announced edge computers built around Intel’s Atom x7000RE processors. SYS-E100-14AM and SYS-E102-14AM mini-PCs have up to eight ‘Efficient’ cores had dissipate less than 12W. “While the SYS-E102 comes in a form factor of only 190 x 44 x 120 mm, these systems offer up to 16GB of DDR5-SODIMM, dual 2.5 GbE LAN ports, two independent HDMI ports, three ...
NXP reveals MCX MCUs with Matter, Thread, Zigbee and Bluetooth LE
NXP has finally revealed the wireless versions of its MCX microcontrollers, first announced in mid-2022. “Featuring the industry’s first MCU with Bluetooth Channel Sounding, NXP’s MCX W series enables edge devices with secure multi-protocol wireless for Matter, Thread, Zigbee and Bluetooth Low Energy,” according to the company, which explained: “Bluetooth Channel Sounding standard improves the accuracy and security of distance ...
Integrated processors accelerate Ethernet adoption in factory automation
Ethernet-based industrial communications is not a far-off, unattainable vision of factory and process automation. It is being adopted at a rapid pace, says Vaibhav Desai. The cost, complexity and scalability challenges of Ethernet-based communications mean that serial interfaces are still the standard for wired communications. This is understandable, given the cost-effectiveness and reliability of IO-Link and RS-485. Design and software ...
80V symmetric dual n-channel mosfet in 3 x 3mm
New Yorker Electronics is aiming at displacing PowerPAK 1212 packaged mosfets by stocking a pair of symmetric 80V n-channel mosfets in a single 3.3 x 3.3mm package from Vishay. Called SiZF4800LDT, the “device provides designers with a space-saving solution for synchronous buck converters, point-of-load converters, and half-bridge and full-bridge power stages,” according to New Yorker. “In these applications, the high ...
Surface-mount industrial M12 connectors
Binder has announced surface-mount M12 circular connectors. “They are suitable for processing in fully automated processes, such as for the particularly dense, double-sided assembly of PCBs,” it said. They are available “in blister or tape and reel packaging for automated processing”. Versions with 4, 6 and 8 contacts and with different codings are being offered, in both shielded and unshielded ...
BASF picks 6MWh sodium-sulphur battery for solar power back-up
BASF Schwarzheide has installed a 1MW 5.8MWh sodium-sulphur battery to increase the amount of energy it can use from the solar park at its manufacturing site in Lusatia Germany, where it produces electric vehicle battery materials. “The stationary energy storage system is another step towards increased sustainability in battery production for electric vehicles,” said company v-p of battery metals Daniel ...
Compact hybrid capacitors are AEC-Q200 compliant
Panasonic Industry has introduced compact surface-mount electrolytic polymer hybrid capacitors that are “one size smaller than ZC series with the same capacitance” and AEC-Q200 compliant for automotive use, it said. Called the ZL series, the parts come in five case sizes from 5mm diameter (ø) x 5.8mm high (47 or 82μF), to 10ø x10.2mm (470 or 680μF). There are two ...
Wurth advocates press-fit PCB connections for high-voltage vehicle power distribution
Würth Elektronik is promoting PCBs with press-fit power connectors as the interconnection technology of choice for high-voltage power distribution in mobile machines and commercial vehicles. It has a design service for vehicle companies seeking custom power distribution units that handle between 60 and 1,000V “that are compact, robust and can be flexibly configured”, it said. “Press-fit technology makes it possible ...