Imaging Development Systems (IDS) is offering Sony’s IMX662 1/2.45 inch 2.16 Mpixel sensor in both colour and monochrome cameras. U3-38C0XCP comes in a completely closed 29 x 29 x 17mm zinc die-cast housing with an integral C-mount lens holder. “The sensors belonging to Sony’s Starvis 2 series are designed for maximum light sensitivity,” according to IDS. “We offer this rolling ...
Tag Archives: image sensor
ST makes giant image sensor for Las Vegas attraction
STMicroelectronics has made a custom 316Mpixel 18K image sensor for a company with a super-high resolution cinema in Las Vegas. The die measures 99 x 83mm (82.4cm2) – four fit onto a 300mm wafer (right). It can capture images at 120frame/s and transfer data at 60Gbyte/s. “Building a custom sensor of this size, resolution and speed, with low noise, high ...
5K industrial camera is 29 x 29 x 17mm
IDS has adopted Onsemi’s 20Mpixel AR2020 image sensor for an industrial camera called uEye+ XCP. It has 5,136 x 3,856 pixels, a USB3 interface and a closed housing measuring 29 x 29 x 17mm that includes a mechanical interface for C-mount lenses. “With the rolling shutter sensor AR2020 [is] the technical successor of the Onsemi AR1820,” said IDS. “With 20Mpixel, ...
A fiery end to Aeolus, and its Chelmsford-made image sensor
ESA has begun the controlled destruction of its Aeolus global wind-measuring satellite. Launched in 2018, the 1.3 tonne satellite has already worked 18 months longer than its planned three year mission, but is now running out of orbit-maintaining fuel. Matter and radiation released by recent solar flares and coronal mass ejections have temporarily increased drag in space, and ESA is ...
16Mpixel image sensor for factory automation
XGS 16000 is a 16Mpixel global shutter image sensor for factory automation by On Semiconductor. Consuming 1W at 65frame/s, it fits into standard 29 x 29mm industrial cameras with C-Mount lenses – it has a 1:1 square aspect ratio. It also shares a common architecture and footprint with other XGS CMOS image sensors, enabling users to create a single camera design ...
Start-up curves the face of CMOS image sensors
Paris start-up Silina has developed a way to curve hundreds of imaging sensors at the same time, simplifying associated external optics, it said. In nature, most vision systems use curved retinas with the curved retina allowing a single simple lens to provide a wide field-of-view and good image quality from a compact optical system, according to the company, while flat electronic sensors ...
Camera board for battery-powered IoT image capture
On Semiconductor has released a pcb-level low-frame-rate low-power IoT smart camera for cloud-based AI image capture and recognition. Called the RSL10 Smart Shot Camera, it is intended to add “the power of [cloud] AI-based image recognition to low-power IoT endpoints, such as surveillance cameras, restricted areas, factory automation, smart agriculture and smart homes”, according to the company. “A companion smartphone application ...
3D camera is IP65 to give robots robust eyes
IDS has extended its 3D camera series with compact and robust devices designed specifically for robotics and automated series production. Ensenso N40 and N45 are IP65/67 protected for use in harsher environments, with fibre-reinforced plastic cases making them the lightest stereo vision cameras equipped with Gigabit Ethernet in the IDS product range. Rounded corners minimise injury risk. Sensing comes through ...
Global shutter CMOS image sensor for machine vision
ON Semiconductor has introduced a 2.3Mpixel 120frame/s global shutter image sensor for machine vision and mixed-reality displays. Called AR0234CS, te CMOS sensor captures 1080p video and single frames, and “produces crisp and clear images by minimising frame-to-frame distortion in high-speed scenes and reducing the motion artifacts”, according to the company, which also sees the device being used in AR headsets, VR headsets, autonomous mobile ...
Graphene bolometer detects microwaves best
A superconductor-graphene-superconductor Josephson junction has shown a noise-equivalent power of 7 x 10-19W/√Hz, which corresponds to an energy resolution of a single 32GHz photon, according to an international research team. The bolometer is embedded in a 7.9GHz microwave resonator with >99% coupling efficiency. “Our results establish that two-dimensional materials could enable the development of bolometers with the highest sensitivity allowed by the ...