Maxim has introduced a chip to interface devices equipped with I2C or SPI bus connections to its ‘1-wire’ bus. Called DS28E18, it is intended to knock cost out of networks that connecting I2C and SPI sensors to a host by reducing the number of copper wires needed for up to 10 nodes to two wires. Busses over 100m long are ...
Communications
Anritsu boosts MP1900A analyser for 400 and 800Gbit Ethernet
Anritsu has added forward error correction symbol capture and bathtub test to its 116Gbit/s PAM4 error detector (MU196040B) for developers of 400 and 800Gbit/s Ethernet devices. For use in the company’s MP1900A signal quality analyser, the functions can be downloaded from the MP1900A website. “Data centres are investigating speed upgrades from 100Gbit Ethernet to 400Gbit Ethernet and in future to 800Gbit ...
mmWave for 6G
Wireless communication in mmWave bands, which range from 20 GHz to 300 GHz, is expected to be a key enabling technology for 6G wireless systems, because the huge available bandwidth can accommodate ultra-high data-rate communications. Within that range of mmWave bands CEA-Leti’s research is investigating D-band, a new spectrum at 140 GHz that may play a major role for 6G ...
ISSCC 2020: No-crystal oscillator hits 30ppm over temperature and 10 years of ageing
At the IEEE International Solid State Circuits Conference in San Francisco earlier this year, Texas Instruments revealed details of its on-chip bulk acoustic wave oscillator technology, that can replace external crystals in Bluetooth and other RF transceivers. The firm is claiming better than ±30ppm frequency stability over -40°C to 85°C, package stress and 10 years of ageing. The resonator is ...
Perovskite photo diode doubles as an LED
A perovskite photo diode that becomes a viable LED when its bias is reversed has been created at Linköping University in Sweden, allowing bidirectional communication between two identical devices. “We have managed to integrate optical signal transmission and reception into one circuit, something that makes it possible to transmit optical signals in both directions between two identical circuits,” said LiU ...
Microsoft recruits ST, Renesas, NXP, Microchip and Qualcomm for Azure MCU kits
STMicroelectronics, Renesas, NXP, Microchip and Qualcomm have signed up to offer 32bit MCU development kits featuring Microsoft’s Azure RTOS ThreadX, one of the components of the its Azure RTOS embedded application development suite. “Their MCUs are embedded into billions of devices. This allows embedded developers to access reliable, real-time performance for resource-constrained devices, and seamless integration with the power of Azure IoT to connect, ...
Smart secure eval kit for for automotive data gateway
STMicroelectronics is aiming at automotive gateways that link car electronics to the cloud with an evaluation kit built around secured chips. Called SGP-TC-EVK ‘smart gateway platform’, potential use-cases include over-the-air (OTA) management, firewall, Ethernet packet inspection, secure CAN-to-CAN data routing, secure CAN-to-Ethernet data routing, body control management, intrusion detection and predictive maintenance. On-board M.2 and Mini PCIe expansion connectors are provided to ...
mmWave synthesiser chip covers 172MHz – 18GHz
Renesas has introduced a mmWave synthesiser for 5G and broadband wireless applications. “We developed our 8V97003 for mmWave radios, ensuring it meets demanding frequency range, phase noise, and output power requirements,” said Renesas v-p of timing products Bobby Matinpour. “8V97003 is particularly well-suited for emerging applications above the 6GHz carrier frequency, including broadband wireless, microwave back-haul, and 5G radios.” The ...
Microchip aims to simplify secure IoT product development
With the design of secured IoT products in mind, Microchip has announced range of cloud agnostic embedded development products that connect through Wi-Fi, Bluetooth or narrow-band 5G. “From the smallest PIC and AVR MCUs for sensors and actuators, to 32bit MCU and MPU gateways for edge computing, the company is making it possible for developers to connect to any major ...
Nexperia USB4 ESD clamp adds only 100fF
Nexperia has managed to achieve 100fF load capacitance in devices designed to protect USB4 signal lines. “Of special interest to engineers designing USB4 and Thunderbolt interfaces, the new device uses Nexperia’s TrEOS ESD protection technology with active silicon-controlled rectification,” according to the firm. “It delivers a combination capacitance down to 0.1pF), dynamic resistance down to 0.1Ω and 20A 8/20µs surge robustness.” ...