Home » Markets » Power (page 6)

Power

Sponsored Content: AC/DC Leakage Current Sensors and Real-Time Energy Sensors from Bituo Technik

ACDC-Residual-Current-Sensors-from-BITUOTECNIK-300x200.png

Advancing electrical safety and energy efficiency with RCD and PMD technology integration. Bituo Technik, a Shanghai-based technology provider, has gained recognition as a leading supplier of Residual Current Devices (RCDs). Their expertise in RCDs is evident through the integration of type-A/F leakage current detection ICs and type-EV/B leakage current sensors into various electrical protection devices across Asia and Europe, including ...

IC cuts current pulsing to extend IoT coin cell life

Nexperia NBM5100 coin cell power IC block

Nexperia has created a dc-dc converter chip designed to extend the life of 3V primary coin cells in bursty IoT applications, such as those with pulsed radio transmitters. “The IC’s designed to extend the life of a typical non-rechargeable lithium coin cell battery while also increasing peak output current by up to 25x compared to what a typical coin cell ...

85V 75A 20bit current, voltage and power monitor has 535μΩ sense resistor

TI INA780x digital output current monitor

Texas Instruments has created a series of precision current monitors with digital outputs, for use across power rails from  -100mV to +85V, at up to ±78.64A. In each case, an internal ΣΔ ADC measures current across an integrated sensing resistor, as well as voltage and temperature – communication with the host if via I2C. The ICs need a separate supply ...

Galvanically isolated gate driver for GaN transistors

ST STGAP2GS GaN driver block 757

STMicroelectronics has created its first galvanically isolated gate driver for GaN transistors. Called STGAP2GS the wide body SO-8W packaged single-channel driver can work with rails up to 1.2kV. The package is 5.8mm long by 10.3mm across pins tips, with 7.5mm between leg roots on either side of the isolation barrier. A separate supply (above), or dual supplies (left) if a ...

Nexperia starts IGBT production, starting at 600V

Nexperia 600V IGBTs

Nexperia has entered the IGBT market, with a 600V 30A device, to be followed by 40, 50 and 75A types. “IGBT is a relatively mature technology,” said the company. “Nonetheless, the market for these devices is expected to grow in line with the increased adoption of solar panels and electric vehicle chargers. Nexperia’s 600V IGBTs feature a carrier-stored trench-gate field-stop ...

300kW wave energy generator back-on-track

CorPower Ocean C4 wave energy converter

CorPower Ocean has resumed the deployment of its commercial-scale C4 wave energy generator, following repairs at Portugal’s Aguçadoura offshore wave energy test site. Earlier this year, CorPower found cable damage at the site, recovered the cable using remotely-operated vehicles and construction vessels, and refurbished the link. “With the site infrastructure restored, CorPower Ocean has resumed the deployment programme by testing ...

1,750hp motor meets US NEMA standards

ABB AMI5800 large NEMA induction motor

ABB is focussing on companies exporting heavy equipment to the US with a series of long-life motors built to meet NEMA requirements. Constructed with NEMA 5800 (368.5mm, 14.5inch shaft height) frames, the induction motors can deliver up to 1,750 horse power. They have “high-strength welded steel frame construction usually reserved for larger motors reduces stress and vibration to ensure a ...

Power tool eval board from ST and Wurth

ST Wurth stdes-ptool3demo power tool design

Würth Elektronik and STMicroelectronics are demonstrating a brushless dc motor power tool power circuit developed between them. The demo is based on the STDES-PTOOL3A evaluation board. “The Gerber files, bill of materials, schematics and all other reference materials are downloadable from ST.com without charge,” according to Wurth. From ST comes the STM32G4 (Cortex-M4) MCU, STDRIVE101 gate driver and six STL220N6F7 ...

4V to 65V hot-swap, soft-start and ideal-diode OR-ing IC for automotive functional safety

STPM801 ideal diode block

For vehicle functional-safety applications, STMicroelectronics has combined hot-swap, soft-start and ideal-diode OR-ing in an IC intended to work with a pair of external n-channel mosfets over 4 to 65V. Called STPM801, “the ideal-diode controller drives an external mosfet replacing a Schottky diode conventionally used for reverse-input protection and output-voltage hold-up”, said ST. “When a reverse-voltage event occurs, in case of ...

Low-spiking 100/80V mosfet range gets 8x8mm packaging

Nexperia NextPower 8x8mm and 5x6mm package

Nexperia has added an 8x8mm package option, and a second 5x6mm option, to its ‘NextPower’ mosfet range which is designed to decrease spiking when switching to reduce EMI. “The Qgate.Rds(on) figure-of-merit has long been a focus for semiconductor manufacturers aiming to improve the efficiency of MOSFET switches,” according to the company. “However, relentlessly pushing this figure ever lower has had ...