Tag Archives: current

Weidmuller has announced a series of battery connectors and battery connector cable assemblies. They are “engineered to handle high currents” and “designed to withstand harsh environmental conditions”, according to the company. Connectors for cables from 16 to 95mm2 are available, with contacts made from copper alloy finished with silver and, approved according to UL 4128. Predicted mechanical connection life, without ...

Allegro MicroSystems has introduced a pair of surface-mount current sensors that work from dc to 5MHz. Variants allow six sensitivities between 66mV/A (±20A range) and 20.3mV/A (±65A). Response time is typically 40ns. They are “fast enough for SiC and GaN protection, while also providing low-frequency content for power-conversion control”, said Allegro product manger Matt Hein. ACS37030 and ACS37032 employ dual ...

LEM and Semikron Danfoss have teamed up to monitor current in automotive silicon carbide power mosfet modules. The result is ‘Nano’, a current sensor that is compatible with Semikron’s DCM SiC power modules, which are rated at 750 or 1,200V and 200 to 1,000A. “The idea behind the Nano concept was to design a core-based current sensor that could fit ...

Lem has introduced a pair of mains residual current monitors for electric vehicle charging that have both digital and analogue outputs. One monitors single-phase live and neutral (CDSR 0.07-TP, photo right), while the other monitors three phases and neutral (CDSR 0.07-NP, photo below). “Because electric vehicles use a high voltage battery, they are also a high-power energy source. This needs ...

LEM has announced three-phase current sensors that fit silicon carbide power modules typically used in 800V vehicle traction inverters. “Developers of automotive traction inverters are increasingly using three-phase power modules such as Hybridpack Drive from Infineon, Acepak Drive from ST Microelectronics, SSDC from ON Semi, and others such as Starpower and CRRC,” according to LEM. “The current sensor offers current ...

STMicroelectronics has introduced a precision digital current, voltage and power monitor with a an I3C bus interface. Called TSC1641, it has two 16bit ΣΔ converters at its inputs, allowing simultaneous measurement of current (LSB=2.5µV) and voltage (LSB=2mV). The measured voltage can be anywhere from 0 to 60V (65V abs max), and the two current terminals sense with either polarity across ...

Melexis is claiming 1% accuracy over temperature and life for its latest galvanically-isolated Hall effect current sensor. “MLX91230 guarantees this accuracy not only for thermal drift but also lifetime drift and linearity errors,” according to the company. The 8pin SOIC device is AEC-Q100 and ASIL compliant, supporting system integration up to ISO 26262 ASIL D functional safety requirements. Current measurement ...

Texas Instruments has picked the Hall effect for its latest isolated current sensor, and claims 50ppm/°C drift over temperature and ±0.5% drift over lifetime. Aimed at electric vehicle chargers and with versions available up to 75Arms, isolation in the TMCS1123 is rated at 1.1kVdc, and to withstand 5kVrms. “Assessment of device lifetime working voltages follow VDE 0884-11 for reinforced insulation, ...

Ditronix has released the an IoT power monitor board for mains and solar energy, and a software development kit to go with it. Called ‘IPEC’, it provides three phase (3P3W, Y or Δ), split-phase, or three-channel single phase monitoring, and has an expansion ports that can be configured for DAC, PWM, MPPT (peak power tracking) or I2C outputs. “The board ...

Advancing electrical safety and energy efficiency with RCD and PMD technology integration. Bituo Technik, a Shanghai-based technology provider, has gained recognition as a leading supplier of Residual Current Devices (RCDs). Their expertise in RCDs is evident through the integration of type-A/F leakage current detection ICs and type-EV/B leakage current sensors into various electrical protection devices across Asia and Europe, including ...