Home » Tag Archives: GPS

Tag Archives: GPS

Module provides 10m location accuracy and LTE-M for IoT comms

u-blox_SARA-R52

U-blox is sampling a module that combine LTE-M cellular communication (23dBm output) and GNSS for precise location finding. SARA-R520M10 is the super-set device, combining on-board an LTE-M and NB-IoT IC (v2 of UBX-R5) with the company’s M10 GNSS receiver IC, allowing concurrent communication and location-finding in a 16 x 26 x 2.2mm package. Cellular coverage is global, and the module ...

RFoF reinforces military communications

Optical-Zonu-Figure-1-CDL-Remote-Layout-wo-logo-002-300x200.jpg

The stakes have never been higher for reliable and efficient communications for military use, says Meir Bartur, of Optical Zonu. In an era where technological advancements such as automation are transforming every aspect of military operations, reliable and efficient communications have become paramount. When the Pentagon received $7.5bn in 2021 to fund unmanned systems across the US Air Force, Army ...

ESA plans to bring satnav closer to Earth with FutureNAV

ESA-NAVISP_for_driving_pillars-300x200.jpg

ESA is planning an in-orbit demonstration with new navigation satellites that will orbit just a few hundred kilometres up in space. It is part of its FutureNAV initiative. The long-term goal is to bring satnav closer to Earth, by extending GNSS and supporting positional navigation and timing (PNT) services from low Earth orbit (LEO) . The mini-constellation will eventually supplement ...

LoRa, GNSS and cloud service on Arduino MKR-style module for 15km range IoT

u-blox Move-X Cicerone LoRa GNSS

Move-X is aiming at tracking applications that need meter-level accuracy and a long-range battery-powered wireless connection with a module that is physically compatible with Arduino’s 63mm long MKR boards. Called Cicerone, it is built around u-blox’ MAXM10S GNSS (sat nav) receiver module and Move-X’ MAMWLE LoRa transceiver module, which has a Semtech SX126x inside. “This combination allows for synergy between ...

Raytheon to modernise space-based WAAS navigation system

WAASGraphic-300x200.jpg

The U.S. Federal Aviation Administration (FAA) has contracted Raytheon to further refine the space-based precision navigation system WAAS (Wide-Area Augmentation System). Specifically, Raytheon Intelligence & Space will modernise the system, in terms of system security, network architecture and adding dual frequency service. WAAS was developed by the Federal Aviation Administration to augment GPS services by increasing its accuracy and availability. ...

Mobile robotics PC has hardware time sync, and GNSS-IMU interface

Aaeon RBX-I2000 robot computer

Aaeon has introduced its first autonomous robot controller, with integrated hardware time synchronisation and support for an external nine-axis IMU (inertial measurement unit). Aimed at outdoor autonomous mobile robots and called RBX-I2000, “the largest improvements offered are its speed and positional accuracy,” according to the company. “By moving away from solely software-based time synchronisation, latency is reduced from the standard ...

Multi-protocol 700 MHz to 3,000 MHz IoT antenna is over 80% efficient

RangeAntMax antenna

RangeAnt has created a family of 700MHz to 3GHz antennas, designed primarily for cellular, IoT and GNSS applications. “They feature free-space efficiency of between 80 and 90% and a VSWR below 2:1 across the operating bands,” according to the company. “The high efficiency delivers greater range for available transmitter power, or a lower transmitter power can be used for a ...

Cat 1 LTE modules offer worldwide data coverage

ublox LARA LENA

U-blox has announced two LTE Cat 1 module series offering multi-regional data coverage. “The modules offer device makers facing imminent 2G and 3G network sunsets a migration path to 4G technology for data streaming applications,” according to the Swiss company. “Additionally they offer MQTT Anywhere and MQTT Flex connectivity via u-blox’s Thingstream platform out of the box, enabling seamless roaming.” ...