Home » Tag Archives: Li-ion

Tag Archives: Li-ion

IoT power eval board stands-by for years

NGK Rohm IoT psu eval board photo

NGK Insulators has teamed up with Rohm to produce a complete energy storage evaluation kit for IoT devices including shelf-edge labels. Called REFLVBMS001-EVK-001, it measures 56 x 32 x 1.6mm and the components, including the battery, stand a maximum of 1mm above the PCB. It can accept power at 4.5 to 5.5V, and outputs up to 500mA at one of ...

Lithium titanate – cells you can charge below 0°C

Nichicon lithium titanate cold charge

While lithium ion cells have many wonderful characteristics, one of the great limitations is that they cannot be charged below 0°C. This statement, it turns out, is slightly glib as there is one Li-ion chemistry that can handle it: lithium titanate, it is usually called. And just a note here: not all lithium titanate cells are so blessed. One manufacturer ...

Temperature sensing tape runs through vehicle Li-ion battery packs

LittelFuse-TTape-temperature-sensitive-tape

Littelfuse has invented an AEC-Q200-qualified temperature monitoring tape for electric vehicle batteries. Branded TTape, it detects local over-heating via thermally sensitive spots spaced along its length, all connected in series. The spots are positive temperature coefficient thermistors. “Distinguishing itself from NTCs [negative temperature coefficient thermistors], the profound advantage of localised cell overheating detection ensures quicker alerts to the battery management ...

Li-ion management IC for batteries up to 25V

ST L9961 li-ion manager

For Li-ion battery packs up to 25V, STMicroelectronics has introduced an IC for monitoring, balancing and protection, aiming at cordless power tools, back-up energy storage and medical devices. Called L9961, its “built-in features include a dual pre-driver for controlling battery-pack safety relays, which can be programmed for high-side and low-side connection”, said ST. “An embedded non-volatile memory for configuration data ...

500Wh/kg and 1,300Wh/litre from lithium ion cells

Amprius silicon anode lithoum ion diag

Amprius Technologies of California is claiming energy density of 500Wh/kg and 1.3kWh/litre from its latest demonstration of lithium-ion battery technology. This is about double the capacity of today’s general purpose cells. “The energy density performance was verified by [test house] Mobile Power Solutions. The results indicate that this cell model provides >504Wh/kg and >1,321Wh/litre at 25°C,” according to Amprius. This ...

One I missed: TDK CeraCharge solid state surface-mount rechargeable battery

TDK CeraCharge solidstate battery

Already aware of NGK’s interesting EnerCera solid-state lithium-ion cells, I recently came across TDK’s CeraCharge surface-mount solid state rechargeable battery, which appeared in 2020. Intended for load-levelling in energy harvesting applications and backing up real-time clocks, there is one TDK CeraCharge part, the 1812 packaged (4.4 x 3 x 1.1mm) BCT1812M101AG, which operates across 0 to 1.6V (1.5V nominal) and ...

Power IC for Bluetooth LE has reset, battery fuel gauge, watchdog and more

Nordic nPM1300 dcdc package photo

Nordic Semiconductor has announced a power management IC for devices with Bluetooth Low Energy interfaces that includes battery charging and four regulated power outputs. To be called nPM1300, it is to emerge in 3.1 x 2.4mm WL-CSP or 5 x 5mm QFN packaging and be controllable over an I2C compatible interface. “The interface provides access to system management functions such ...

Electronica: Eval kit estimates remaining charge in novel Li-ion cells

NGK Onsemi remaining enercera capacity eval board

NGK Insulators has revealed a fuel-gauging evaluation kit for its novel Enercera lithium ion cells, some of which are amongst the few Li-ion cells to be chargeable below 0°C, and some of which can be float-charged. “As part of development support,” said the company, “NGK will provide all customers that use EnerCera with reference designs and evaluation boards free-of-charge starting ...

Silicon anode material licenced from Nexeon

Nexeon nsp1 silicon anode

Oxfordshire silicon anode firm Nexeon has has licensed its NSP-1 material to Korean giant SKC, an investor in Nexeon. “Silicon-graphite hybrid electrodes are now delivering superior performance in hybrid and EV vehicles,” said SKC v-p Junghwan Shin. This arrangement follows the investment and strategic partnership announced between the two companies in January, and represents further income, said Nexeon: “The exclusive ...

Nexeon pulls in $80m towards silicon anodes for Li-ion cells

Nexeon

Oxfordshire-based silicon anode research company Nexeon has landed a $80m investment from a consortium including SKC, SJL Partners, BNW Investment and Kiwoom Private Equity. “SKC, a $5bn market cap company, is one of Korea’s leading advanced materials companies, with a strategic focus on rechargeable battery and semiconductor materials,” according to Nexeon. “Through this transaction, Nexeon enters into a strategic partnership ...