Industrial Electronics

The industrial circular connector specialist binder is aiming its 770 NCC series also at the medical market. NCC stands for Not Connected Closed, and when mated they meet the requirements of IP67 making them dust-tight and protected against temporary submersion, binder writes. “The series is mainly designed for use in industrial and healthcare environments where liquid media typically occur. The ...

Moxa is aiming at rail vehicles and trackside use with PCs that comply with the E1 Mark (applied for), ISO 7637-2, and EN 50121-4 standards for vehicular and wayside applications. The V2403C series industrial computers are built around Intel’s 7th generation Core i7, Core i5, Core i3 or Celeron processors, and come with up to 32Gbyte RAM, one mSATA slot ...

Danisense has launched a smart version of its residual current monitor. Called SRCMH070IB+, it has a USB connection to allow residual currents to be analysed in detail on a PC using Windows-based software. Oscilloscope and FFT frequency analysis is available (right). The product is complaint with the updated norm IEC62020-1. “This means that it can used for remote monitoring without the need ...

Lemo is accommodating cables from 10mm2 (AWG 8) to 50mm2 (AWG 1) and currents up to 430A in high-power additions to its M-series of connectors. There are uni-pole and multi-pole parts (right) for for single three-phase requirements. “These configurations were developed for high power distribution of electronic devices and electric drive vehicles,” according to the company. “They are suited to the ...

Congatec has introduced computer-on-modules and single-board computers for smart factories and industrial automation at Smart Factory & Automation World. In Size E and Size D COM-HPC Server modules, it is offering Intel Xeon D processors for real-time micro-server workloads. Up to 20 cores are available with up to 1TB of RAM and “double throughput per PCIe lane compared to Gen 3 ...

C&K has added a cold white illuminated and waterproof key switch to its K12S range. Called K12S Bright White, the “cold white illumination option addresses the growing need for a high-quality switch with brighter illumination for high-volume industrial and automotive manufacturing”, according to the company. The switches are surface-mount and cylindrical: close to 11mm in diameter and 9mm tall above ...

P-Duke is aiming at rail and industrial use with a family of 20W 25.4 x 25.4mm dc-dc converters with wide input ranges. Depending on part, they take 9 to 75Vdc, or 14 to 160Vdc, and turn that into single or dual outputs of 5, 5.1, 12, 24, ±12 or ±15Vdc. “Using just one dc-dc model converter for 24, 28, 36, 48, 72, ...

The industrial circular connector specialist, binder, is offering cage clamp termination options for a large part of its M12 ranges. Helping to ensure a vibration-proof connection for applications subject to mechanical loads – the company cites machines that are exposed to vibrations caused by motors or manufacturing processes, for example – the cage clamp variants are available for binder’s M12 connector ...

Vishay has announced 0805 SMD resistors that combine 450V operation with ±0.1% tolerance and a temperature coefficient as low as ±10ppm/K. They are the TNPV0805 e3 series, introduced as part of the greater TNPV e3 series (table below) of automotive high-voltage thin-film flat chip resistors. “Typical applications for the AEC-Q200 qualified device will include voltage measurement in automotive and industrial inverters, voltage dividers ...

Hot on the heels of a 10W family of PCB-mount ac-dc converters, Recom is introducing 20W versions, once again with OVC III insulation. RAC20E-K/277 modules have a 53 x 28mm footprint and ate 23mm tall above the circuit board – with these E-K parts dimensionally the same as the company’s K series converters, “but with different pinning for compatibility with ...