May & Scofield manufacturers electronic controls and systems, and needed to fulfill a contract for automotive flex circuits which forbade hand soldering. It turned to capital equipment distributor Altus, which recommended Promation’s Quick 9434 four-axis soldering robot which for consistency, according to Altus, has closed-loop temperature control up to 500°C and a toothed gear solder wire feeder that also perforates the ...
Tag Archives: distribution
GHz baluns and couplers in 0603 packaging
Component distributor Richardson RFPD is to stock a range of 0603 (1.5 x 0.7mm) RF components from TTM Technologies, all branded ‘Xinger’ and “designed to meet the density and performance challenges of next-generation 5G transceiver and power amplifier applications”, according to Richardson. They include: Three Xinger 90° 3dB hybrid couplers at 1.8 – 2.3GHz, 2.2 – 2.8GHz or 3.1 – ...
Accurate LCR meter has extremely wide ranges
Sciospec LCR-1 is a PC-based single-channel LCR meter that offers 2-, 3- and 4-port measurements across 100mHz to 500kHz, with 1mΩ – 1TΩ, 10fF – 1kF and 1nH – 1TH capability. Options include upper frequency expansion to 1 or 10MHz, and it comes with PC-based software for automated measurements and analysis, which displays up to four parameters at the same ...
Conesys MIL-DTL-26482 connectors from Powell Electronics
Powell Electronics is now supplying cylindrical Series II MIL-DTL-26482 connectors from Conesys, for commercial, aerospace and military applications. This style of connector, Conesys AE7 series, has a bayonet coupling and rear-removable crimp contacts. Shells are aluminium or stainless, said Powell (the catalogue linked below says mild steel or stainless, Electronics Weekly has requested clarification), and there are four receptacle-mounting styles: ...
Supercaps for automotive memory and RTC back-up
Kemet has introduced three automotive grade supercapacitors. “Optimised design and materials enable a service life of up to 1,000 hours at 85°C or 105°C, and the components meet the special requirements of the 85°C, 85% relative humidity, 1,000 hour test [‘THB test’] for the automotive industry,” according to distributor Rutronik, which is stocking the parts. “Thanks to their characteristics, the ...
Cornell Dubilier’s AEC-Q200-qualified EMI/RFI capacitors available from New Yorker Electronics
The AEC-200 Y2 class interference suppressor capacitors by Cornell Dubilier that meet a 2,000 hour THB (temperature, humidity and bias) life test are available from New Yorker Electronics. The MYH series were subjected to 2,000 hours THB testing at 85°C, 85% relative humidity at rated voltage, which is twice the industry standard test hours required to meet IEC 60834, Class ...
Film capacitors up to 10μF and 1kV handle surges in high power inverters without degrading
Electrocube has created a series of metallised polypropylene film capacitors for high power inverters in military and commercial, land and sea, applications. Voltage ratings of 400, 600 and 1,000V are available, and capacitances from 100nF to 10μF, plus 15 and 20μ in the 400V range “Able to handle high surge currents without degrading, Electrocube’s 985B is a rugged, non-inductively wound ...
Managed or unmanaged industrial Ethernet switches
Moxa has introduced families of Ethernet switches for industrial environments. Spread across EDS-2000 and EDS-4000, they are being stocked in the UK by Impulse Embedded. “The core difference between ranges is their manageability: EDS-4000 switches are managed, which provides a higher level of control, security and optimisation,” according to Impulse, “EDS-2000 switches are unmanaged, which means that these function out-of-the-box, ...
“Widest axial mating tolerance” RF contacts
Component manufacturer and distributor Powell Electronics is claiming “the widest axial mating tolerance of blind-mate RF contacts currently available on the market” for coaxial connector parts from Phoenix Company of Chicago, which it is now stocking. “This enables the contacts to accommodate large radial and axial misalignment tolerances found in modular applications,” continued Powell. They provide “constant impedance even as ...
Harwin: CAD models, live distributor stock levels and on-line pricing
Connector maker Harwin has teamed up with TraceParts to offer 3D models of its connectors as well as models of its board-level EMC shielding and PCB hardware. “Models are available in all current file formats for engineers to integrate directly into their CAD system,” according to Portsmouth UK based Harwin. The same deal has put Harwin’s parts onto TrustedParts, a ...